0
ARTEC SE-3PA Bass
ARTEC SE-3PA Bass
ARTEC SE-3PA Bass
DESCRIPTION

ARTEC SE-3P 3-band EQ Preamp for Active/Passive Pickups

    SE3P features a pre-wired balance control, master volume, Bass and treble on separate potentiometers with the mid band control and Frequency Range Shift on one Concentric Pot.
    Each control pots are designed to connect to PCB by a connector, which make SE3P installation easier and versatile.
    High Impedance Input design can match with any Active and Passive Pickup and also Low Impedance Output will keep the same tone from your guitar to any amplifier system without losing high frequency response.
    Using advanced Surface Mount Technology could reduce unwanted sound (Noise) while increasing sound quality and it's reliability.
    ARTEC guarantees a virtually noiseless sound with long 9 V battery life.
    (more than 2000 hours in continuous use. workable voltage : drop down to 2.2 V).
    SE3P-A features SE3P with Concentric Potentiometer, which is Bass and Treble eq's  on one Concentric pot.

    Application : Electric Basses,  Electric guitars & Piezo pickup equipped instruments.

    Technical Specifications :
    Bass : +/-12 dB at 100 Hz,
    Middle : +/-12 dB at 400 Hz ~ 2 kHz,  
    Treble : +/-12 dB at 4 kHz,     
    Balance : MN500K Potentiometer
    Current : 0.32 mA  
    Voltage range : 6 V ~ 22 V 
    Battery : 9 V Alkaline

    SE3PA

    Features :
    - 2 individual pots
      Balance, Volume,
    - 2 Concentric pots  
      Bass / Treble
      Middle / Frequency
    - Battery clip

    Best Selling Products
    artec

    ARTEC SE-3PA Bass

    1,500 ฿
    Out of Stock
    DESCRIPTION

    ARTEC SE-3P 3-band EQ Preamp for Active/Passive Pickups

      SE3P features a pre-wired balance control, master volume, Bass and treble on separate potentiometers with the mid band control and Frequency Range Shift on one Concentric Pot.
      Each control pots are designed to connect to PCB by a connector, which make SE3P installation easier and versatile.
      High Impedance Input design can match with any Active and Passive Pickup and also Low Impedance Output will keep the same tone from your guitar to any amplifier system without losing high frequency response.
      Using advanced Surface Mount Technology could reduce unwanted sound (Noise) while increasing sound quality and it's reliability.
      ARTEC guarantees a virtually noiseless sound with long 9 V battery life.
      (more than 2000 hours in continuous use. workable voltage : drop down to 2.2 V).
      SE3P-A features SE3P with Concentric Potentiometer, which is Bass and Treble eq's  on one Concentric pot.

      Application : Electric Basses,  Electric guitars & Piezo pickup equipped instruments.

      Technical Specifications :
      Bass : +/-12 dB at 100 Hz,
      Middle : +/-12 dB at 400 Hz ~ 2 kHz,  
      Treble : +/-12 dB at 4 kHz,     
      Balance : MN500K Potentiometer
      Current : 0.32 mA  
      Voltage range : 6 V ~ 22 V 
      Battery : 9 V Alkaline

      SE3PA

      Features :
      - 2 individual pots
        Balance, Volume,
      - 2 Concentric pots  
        Bass / Treble
        Middle / Frequency
      - Battery clip

      DESCRIPTION

      ARTEC SE-3P 3-band EQ Preamp for Active/Passive Pickups

        SE3P features a pre-wired balance control, master volume, Bass and treble on separate potentiometers with the mid band control and Frequency Range Shift on one Concentric Pot.
        Each control pots are designed to connect to PCB by a connector, which make SE3P installation easier and versatile.
        High Impedance Input design can match with any Active and Passive Pickup and also Low Impedance Output will keep the same tone from your guitar to any amplifier system without losing high frequency response.
        Using advanced Surface Mount Technology could reduce unwanted sound (Noise) while increasing sound quality and it's reliability.
        ARTEC guarantees a virtually noiseless sound with long 9 V battery life.
        (more than 2000 hours in continuous use. workable voltage : drop down to 2.2 V).
        SE3P-A features SE3P with Concentric Potentiometer, which is Bass and Treble eq's  on one Concentric pot.

        Application : Electric Basses,  Electric guitars & Piezo pickup equipped instruments.

        Technical Specifications :
        Bass : +/-12 dB at 100 Hz,
        Middle : +/-12 dB at 400 Hz ~ 2 kHz,  
        Treble : +/-12 dB at 4 kHz,     
        Balance : MN500K Potentiometer
        Current : 0.32 mA  
        Voltage range : 6 V ~ 22 V 
        Battery : 9 V Alkaline

        SE3PA

        Features :
        - 2 individual pots
          Balance, Volume,
        - 2 Concentric pots  
          Bass / Treble
          Middle / Frequency
        - Battery clip

        other products

        Click

        SHIPPING

        Domestic delivery only

        PRODUCT WARRANTY

        For electric and electronic product only.

        MAINTENANCE

        Only products purchased from importers and dealer that has a warranty on the product.