Stackable 600 Watt 4 x 10" Portable Bass Cabinet with 1" Tweeter and Superior Tone
Product Features
-
Stackable 600 Watt bass cabinet with tweeter offers extreme portability and superior tone for stage and studio use
-
Vertically stackable with other RS range cabinets for uncompromising full-frequency sound
-
Compact and lightweight bass cabinet design
-
4 x 10" custom Eminence* drivers for deep fundamental bass tone
-
1" titanium diaphragm tweeter with 1.5" aluminum coil for increased percussive attack and definition
-
Dual speaker link connections on premium Neutrik speakON* connectors (8 Ohm impedance)
-
L-pad control lets you adjust to get the perfect amount of high-end detail
-
Stylish anti-skid covered plywood cabinet designed for toughest life on the road
-
Designed and engineered in Denmark
Revolution Is My Name
The RS410 is the culmination of our RS series. We did the RS112, RS210, RS212 and naturally progressed to this. But we wanted it to be something special. The RS410 is a perfectly matched 4 x 10" driver + 1" tweeter cabinet for those of you who want to bolster your sound for an even bigger impact.
The RS410 is an 8 Ohm, 600W cabinet that will allow you to instantly get the loudness and tight response necessary, whether you are on stage or in the studio. The RS410 fits perfectly into the 'stackability' system of our existing RS212 and RS210 cabinets.
• Vertical Stacking
• Equipped for a Life of Rock'n'roll
• Custom Eminence Drivers
Stack 'Em High!
We do not believe in conventions or rules. Sure, you adhere to the rules to a certain point - but then you break them! That thought is what lies behind our unique vertical stacking concept that frees up space on the stage, takes weight off your back and most importantly, lets you hear every detail of your playing without sacrificing low-end punch.
The RS cabs come in 4 models: 4x10", 2x10", 2x12" or 1x12", and you can mix and match as well as stack them both vertically and horizontally as you see fit.
Fat Tone, Skinny Weight
If you have a crew of roadies to handle your gear, weight is not a concern of course, but if you have to handle your own rig after a long gig, you know that a 130 lbs. 8x10" cab can suddenly transform itself from a source of sound to Mission Impossible...
Enter our RS cabs. They pack some serious power, but that does not translate into serious weight! In fact, you'll find it a breeze to load and unload the van when you're gigging with our range of RS bass cabs.
Dual Drive
No, we're not talking about overdrive here... When we decided to get into making bass cabs, we did it like we do everything we attempt: 100%. Otherwise, what's the point?
So we teamed with the speaker gurus over at Eminence to design a dual-concentric driver that fits a 1" tweeter inside the main driver.
You may not be able to see it, but it's definitely there making those crispy highs that add a touch of magic to your tone.
Specification
Specs
| Dimensions: |
W x H x D 664 x 596 x 427mm |
| Weight: |
37 kg / 82 lbs |
| Power handling: |
600 Watt |
| Enclosure: |
18mm plywood side panels, 18mm rounded carved hardwood corners |
| Surface treatment: |
'Anti-skid' dual component surface |
| Porting: |
Dual front porting |
| Woofer: |
Eminence custom 10" |
| Tweeter: |
Eminence 33mm voicecoil, titanium diaphragm |
| Tweeter adjustment: |
L-pad (off - 0dB) |
| Impedance: |
8 Ohm |
RS410
Stackable 600 Watt 4 x 10" Portable Bass Cabinet with 1" Tweeter and Superior Tone
Product Features
-
Stackable 600 Watt bass cabinet with tweeter offers extreme portability and superior tone for stage and studio use
-
Vertically stackable with other RS range cabinets for uncompromising full-frequency sound
-
Compact and lightweight bass cabinet design
-
4 x 10" custom Eminence* drivers for deep fundamental bass tone
-
1" titanium diaphragm tweeter with 1.5" aluminum coil for increased percussive attack and definition
-
Dual speaker link connections on premium Neutrik speakON* connectors (8 Ohm impedance)
-
L-pad control lets you adjust to get the perfect amount of high-end detail
-
Stylish anti-skid covered plywood cabinet designed for toughest life on the road
-
Designed and engineered in Denmark
Revolution Is My Name
The RS410 is the culmination of our RS series. We did the RS112, RS210, RS212 and naturally progressed to this. But we wanted it to be something special. The RS410 is a perfectly matched 4 x 10" driver + 1" tweeter cabinet for those of you who want to bolster your sound for an even bigger impact.
The RS410 is an 8 Ohm, 600W cabinet that will allow you to instantly get the loudness and tight response necessary, whether you are on stage or in the studio. The RS410 fits perfectly into the 'stackability' system of our existing RS212 and RS210 cabinets.
• Vertical Stacking
• Equipped for a Life of Rock'n'roll
• Custom Eminence Drivers
Stack 'Em High!
We do not believe in conventions or rules. Sure, you adhere to the rules to a certain point - but then you break them! That thought is what lies behind our unique vertical stacking concept that frees up space on the stage, takes weight off your back and most importantly, lets you hear every detail of your playing without sacrificing low-end punch.
The RS cabs come in 4 models: 4x10", 2x10", 2x12" or 1x12", and you can mix and match as well as stack them both vertically and horizontally as you see fit.
Fat Tone, Skinny Weight
If you have a crew of roadies to handle your gear, weight is not a concern of course, but if you have to handle your own rig after a long gig, you know that a 130 lbs. 8x10" cab can suddenly transform itself from a source of sound to Mission Impossible...
Enter our RS cabs. They pack some serious power, but that does not translate into serious weight! In fact, you'll find it a breeze to load and unload the van when you're gigging with our range of RS bass cabs.
Dual Drive
No, we're not talking about overdrive here... When we decided to get into making bass cabs, we did it like we do everything we attempt: 100%. Otherwise, what's the point?
So we teamed with the speaker gurus over at Eminence to design a dual-concentric driver that fits a 1" tweeter inside the main driver.
You may not be able to see it, but it's definitely there making those crispy highs that add a touch of magic to your tone.
Specification
Specs
| Dimensions: |
W x H x D 664 x 596 x 427mm |
| Weight: |
37 kg / 82 lbs |
| Power handling: |
600 Watt |
| Enclosure: |
18mm plywood side panels, 18mm rounded carved hardwood corners |
| Surface treatment: |
'Anti-skid' dual component surface |
| Porting: |
Dual front porting |
| Woofer: |
Eminence custom 10" |
| Tweeter: |
Eminence 33mm voicecoil, titanium diaphragm |
| Tweeter adjustment: |
L-pad (off - 0dB) |
| Impedance: |
8 Ohm |
Stackable 600 Watt 4 x 10" Portable Bass Cabinet with 1" Tweeter and Superior Tone
Product Features
-
Stackable 600 Watt bass cabinet with tweeter offers extreme portability and superior tone for stage and studio use
-
Vertically stackable with other RS range cabinets for uncompromising full-frequency sound
-
Compact and lightweight bass cabinet design
-
4 x 10" custom Eminence* drivers for deep fundamental bass tone
-
1" titanium diaphragm tweeter with 1.5" aluminum coil for increased percussive attack and definition
-
Dual speaker link connections on premium Neutrik speakON* connectors (8 Ohm impedance)
-
L-pad control lets you adjust to get the perfect amount of high-end detail
-
Stylish anti-skid covered plywood cabinet designed for toughest life on the road
-
Designed and engineered in Denmark
Revolution Is My Name
The RS410 is the culmination of our RS series. We did the RS112, RS210, RS212 and naturally progressed to this. But we wanted it to be something special. The RS410 is a perfectly matched 4 x 10" driver + 1" tweeter cabinet for those of you who want to bolster your sound for an even bigger impact.
The RS410 is an 8 Ohm, 600W cabinet that will allow you to instantly get the loudness and tight response necessary, whether you are on stage or in the studio. The RS410 fits perfectly into the 'stackability' system of our existing RS212 and RS210 cabinets.
• Vertical Stacking
• Equipped for a Life of Rock'n'roll
• Custom Eminence Drivers
Stack 'Em High!
We do not believe in conventions or rules. Sure, you adhere to the rules to a certain point - but then you break them! That thought is what lies behind our unique vertical stacking concept that frees up space on the stage, takes weight off your back and most importantly, lets you hear every detail of your playing without sacrificing low-end punch.
The RS cabs come in 4 models: 4x10", 2x10", 2x12" or 1x12", and you can mix and match as well as stack them both vertically and horizontally as you see fit.
Fat Tone, Skinny Weight
If you have a crew of roadies to handle your gear, weight is not a concern of course, but if you have to handle your own rig after a long gig, you know that a 130 lbs. 8x10" cab can suddenly transform itself from a source of sound to Mission Impossible...
Enter our RS cabs. They pack some serious power, but that does not translate into serious weight! In fact, you'll find it a breeze to load and unload the van when you're gigging with our range of RS bass cabs.
Dual Drive
No, we're not talking about overdrive here... When we decided to get into making bass cabs, we did it like we do everything we attempt: 100%. Otherwise, what's the point?
So we teamed with the speaker gurus over at Eminence to design a dual-concentric driver that fits a 1" tweeter inside the main driver.
You may not be able to see it, but it's definitely there making those crispy highs that add a touch of magic to your tone.
Specification
Specs
| Dimensions: |
W x H x D 664 x 596 x 427mm |
| Weight: |
37 kg / 82 lbs |
| Power handling: |
600 Watt |
| Enclosure: |
18mm plywood side panels, 18mm rounded carved hardwood corners |
| Surface treatment: |
'Anti-skid' dual component surface |
| Porting: |
Dual front porting |
| Woofer: |
Eminence custom 10" |
| Tweeter: |
Eminence 33mm voicecoil, titanium diaphragm |
| Tweeter adjustment: |
L-pad (off - 0dB) |
| Impedance: |
8 Ohm |
other products
SHIPPING
Domestic delivery only
PRODUCT WARRANTY
For electric and electronic product only.
MAINTENANCE
Only products purchased from importers and dealer that has a warranty on the product.