Flexible 400 Watt 2 x 10" Combo Bass Cabinet with 1" Tweeter for RH Heads
Product Features
  • Upright 400 Watt 2 x 10" combo bass cabinet with 1" tweeter offers you flexible heads and extreme portability for stage and studio use

  • Quickly customize by swapping in any RH bass head to suit your performance requirements

  • Pull-up handle and wheels for easy transportation

  • Extremely durable 18 mm plywood construction designed for life on the road

  • Vertically stackable with other RS-range cabinets for uncompromising full-frequency sound

  • Easily-detachable trolley lets you prevent wheel rattle fast when needed, with no extra tools to carry

  • Dual-concentric main driver fits a tweeter inside for a touch of sparkle

  • 2 x 10" custom Eminence* drivers for deep fundamental bass tone

  • 1" titanium diaphragm tweeter with 33 mm aluminum coil for increased percussive attack and definition

  • Dual speaker link connections on premium Neutrik speakON* connectors (8 Ohm impedance)

  • Compact and lightweight bass cabinet design

  • L-pad control lets you adjust to get the perfect amount of high-end detail

  • Designed and engineered in Denmark

RS210C
RS210C

The RS210C cabinet features the same 2 x 10" + 1" Eminence driver configuration found in the award-winning RS210 cabinet.

Additionally, its open amp design allows for you to choose between any of the three compact TC Electronic amp heads: RH750 RH450 or Staccato'51. The amp of your choice simply slides into the amp slot and is secured by a single screw in a matter of seconds.


    •    Fully customizable with any RH head
    •    Pull-up Handle and Wheels
    •    Roadworthy Construction
 

Your Voice, Your Choice
Your Voice, Your Choice

We were not interested in doing a combo that limits you, so we decided on an innovative solution where you can just swap heads as you see fit.

This means that you can get any voicing you like by choosing between our range of RH bass heads. Want more than one? Easy-peasy, you simply switch heads by loosening a single screw in a matter of seconds.

Maximum Portability
Maximum Portability

This is a combo you'd wanna take everywhere so we've made sure you can! It features a pull-up handle and wheels for easy transportation.

Also, you can detach the trolley in seconds if you want to, no need for any tools whatsoever. You can leave the trolley on during gigs, but sometimes you may experience a slight rattle - that's why we made it dead easy to take it off.

Built for The Road
Built for The Road

This combo is super roadworthy and features 18MM hardwearing plywood, super stackability and a breakout speaker connection to drive up to 2 additional TC cabinets.

When on the road, we bet you will enjoy the comfort of having a state-of-the-art head built in to your main cab, as well as the fact that you can wheel it around before and after gigs.

Vertical Stacking Explained
Vertical Stacking Explained

Vertical Stacking... It may sound like a term that was developed by our sales and marketing departments, but in reality Vertical Stacking was born in our bass development department. The concept emerged from years and years of bass playing. Yep, that's right! The guys developing TC bass gear are actually bass players themselves, and they know what it's like out there in the real world of bass.

The Problem
The Problem

If you ever play gigs at private parties or small to mid-sized venues, you probably decided to only bring one bass cab - typically one with a 4x10" speaker configuration.

If you place a 4 x10" cab on the floor the sound waves will bounce off the floor. While this is great for getting that fat low-end impact, the downside is that you can't hear the details of your playing. (Well, your knees can, but not your ears.)

One solution is to place the cab on a chair, a rack case or similar. Now, you can hear the mid and high frequencies much better, but the downside is lack of low-end presence. Since you elevated the cab, you lose the early reflections bouncing off the floor.

In other words, no matter what you do, using only one 4 x 10" cab means a compromise of sound quality.

The Solution
The Solution

The solution to the problem is our unique Vertical Stacking concept. There is nothing wrong with using 4 10" speakers. In most situations, that is more than enough - the problem is that all 4 speakers are fitted inside a square box in a 2x2 configuration.

Our answer is a 4x1 speaker configuration using either two 2x10", 2x10"/2x12" or two 2x12" cabs. Whether you want 10 or 12" speakers or a combination, the point is that you stack the speakers vertically.

The early reflections add punch and low-end to your sound, but at the same time, you can hear every detail thanks to the fact that the top speaker is aligned with your ears.

No More Compromises. Issue Solved!

Horizontal Alternative
Horizontal Alternative

As long as you use TC cabinets, most of our amps can actually handle 3 cabs simultaneously.

Obviously, it would become a very tall stack if you stacked 3 2x10" or 2x12" cabs vertically, in fact you may not be able to reach the amp...

But don't worry, due to the extra cab, it actually makes sense to stack them in the traditional, horizontal way if you hook up three cabs.

Classic Stacking
Classic Stacking

If weight and space is less of a concern, you can always go for the classic configuration of 8x10". Or how about 2x12" in the bottom, 4x10" in the middle and 2x10" on top? Obviously, such solutions will also give you all the benefits of vertical stacking using smaller cabs.

Acoustic Tilt
Acoustic Tilt

Just like early reflections are key to the Vertical Stacking concept, you can take advantage of the same phenomenon if you use either an RS212 or RS112 as the lower cabinet and an RS210 as the upper cabinet.

It's perfectly fine to align the front of each cabinet, but if you want to emphasize clarity and definition in a natural way (without adjusting the tone controls of the amp), try pushing the upper RS210 cab back a bit.

Now, you will get eary reflections of the upper cabinet coming your way, and even though it may sound like a minor adjustment, the difference is significant and you can control the amount of early reflections by how far you push back the RS210 cab.

 

Specification
Specs
Dimensions:

W x H x D 356 x 664 x 356mm

Weight:

21 kg / 46 lbs

Power handling:

400 Watt

Enclosure:

18mm plywood side panels, 18mm rounded carved hardwood corners

Surface treatment:

'Anti-skid' dual component surface

Porting:

Rear porting

Woofer:

Eminence custom 10"

Tweeter:

Eminence 33mm voicecoil, titanium diaphragm

Tweeter adjustment:

L-pad (off - 0dB)

Impedance:

8 Ohm

Amplifiers
TC Electronic

RS210C

Regular price
Sale price
26,000 ฿
Unit price
per 
Out of Stock

DESCRIPTION

Flexible 400 Watt 2 x 10" Combo Bass Cabinet with 1" Tweeter for RH Heads
Product Features
  • Upright 400 Watt 2 x 10" combo bass cabinet with 1" tweeter offers you flexible heads and extreme portability for stage and studio use

  • Quickly customize by swapping in any RH bass head to suit your performance requirements

  • Pull-up handle and wheels for easy transportation

  • Extremely durable 18 mm plywood construction designed for life on the road

  • Vertically stackable with other RS-range cabinets for uncompromising full-frequency sound

  • Easily-detachable trolley lets you prevent wheel rattle fast when needed, with no extra tools to carry

  • Dual-concentric main driver fits a tweeter inside for a touch of sparkle

  • 2 x 10" custom Eminence* drivers for deep fundamental bass tone

  • 1" titanium diaphragm tweeter with 33 mm aluminum coil for increased percussive attack and definition

  • Dual speaker link connections on premium Neutrik speakON* connectors (8 Ohm impedance)

  • Compact and lightweight bass cabinet design

  • L-pad control lets you adjust to get the perfect amount of high-end detail

  • Designed and engineered in Denmark

RS210C
RS210C

The RS210C cabinet features the same 2 x 10" + 1" Eminence driver configuration found in the award-winning RS210 cabinet.

Additionally, its open amp design allows for you to choose between any of the three compact TC Electronic amp heads: RH750 RH450 or Staccato'51. The amp of your choice simply slides into the amp slot and is secured by a single screw in a matter of seconds.


    •    Fully customizable with any RH head
    •    Pull-up Handle and Wheels
    •    Roadworthy Construction
 

Your Voice, Your Choice
Your Voice, Your Choice

We were not interested in doing a combo that limits you, so we decided on an innovative solution where you can just swap heads as you see fit.

This means that you can get any voicing you like by choosing between our range of RH bass heads. Want more than one? Easy-peasy, you simply switch heads by loosening a single screw in a matter of seconds.

Maximum Portability
Maximum Portability

This is a combo you'd wanna take everywhere so we've made sure you can! It features a pull-up handle and wheels for easy transportation.

Also, you can detach the trolley in seconds if you want to, no need for any tools whatsoever. You can leave the trolley on during gigs, but sometimes you may experience a slight rattle - that's why we made it dead easy to take it off.

Built for The Road
Built for The Road

This combo is super roadworthy and features 18MM hardwearing plywood, super stackability and a breakout speaker connection to drive up to 2 additional TC cabinets.

When on the road, we bet you will enjoy the comfort of having a state-of-the-art head built in to your main cab, as well as the fact that you can wheel it around before and after gigs.

Vertical Stacking Explained
Vertical Stacking Explained

Vertical Stacking... It may sound like a term that was developed by our sales and marketing departments, but in reality Vertical Stacking was born in our bass development department. The concept emerged from years and years of bass playing. Yep, that's right! The guys developing TC bass gear are actually bass players themselves, and they know what it's like out there in the real world of bass.

The Problem
The Problem

If you ever play gigs at private parties or small to mid-sized venues, you probably decided to only bring one bass cab - typically one with a 4x10" speaker configuration.

If you place a 4 x10" cab on the floor the sound waves will bounce off the floor. While this is great for getting that fat low-end impact, the downside is that you can't hear the details of your playing. (Well, your knees can, but not your ears.)

One solution is to place the cab on a chair, a rack case or similar. Now, you can hear the mid and high frequencies much better, but the downside is lack of low-end presence. Since you elevated the cab, you lose the early reflections bouncing off the floor.

In other words, no matter what you do, using only one 4 x 10" cab means a compromise of sound quality.

The Solution
The Solution

The solution to the problem is our unique Vertical Stacking concept. There is nothing wrong with using 4 10" speakers. In most situations, that is more than enough - the problem is that all 4 speakers are fitted inside a square box in a 2x2 configuration.

Our answer is a 4x1 speaker configuration using either two 2x10", 2x10"/2x12" or two 2x12" cabs. Whether you want 10 or 12" speakers or a combination, the point is that you stack the speakers vertically.

The early reflections add punch and low-end to your sound, but at the same time, you can hear every detail thanks to the fact that the top speaker is aligned with your ears.

No More Compromises. Issue Solved!

Horizontal Alternative
Horizontal Alternative

As long as you use TC cabinets, most of our amps can actually handle 3 cabs simultaneously.

Obviously, it would become a very tall stack if you stacked 3 2x10" or 2x12" cabs vertically, in fact you may not be able to reach the amp...

But don't worry, due to the extra cab, it actually makes sense to stack them in the traditional, horizontal way if you hook up three cabs.

Classic Stacking
Classic Stacking

If weight and space is less of a concern, you can always go for the classic configuration of 8x10". Or how about 2x12" in the bottom, 4x10" in the middle and 2x10" on top? Obviously, such solutions will also give you all the benefits of vertical stacking using smaller cabs.

Acoustic Tilt
Acoustic Tilt

Just like early reflections are key to the Vertical Stacking concept, you can take advantage of the same phenomenon if you use either an RS212 or RS112 as the lower cabinet and an RS210 as the upper cabinet.

It's perfectly fine to align the front of each cabinet, but if you want to emphasize clarity and definition in a natural way (without adjusting the tone controls of the amp), try pushing the upper RS210 cab back a bit.

Now, you will get eary reflections of the upper cabinet coming your way, and even though it may sound like a minor adjustment, the difference is significant and you can control the amount of early reflections by how far you push back the RS210 cab.

 

Specification
Specs
Dimensions:

W x H x D 356 x 664 x 356mm

Weight:

21 kg / 46 lbs

Power handling:

400 Watt

Enclosure:

18mm plywood side panels, 18mm rounded carved hardwood corners

Surface treatment:

'Anti-skid' dual component surface

Porting:

Rear porting

Woofer:

Eminence custom 10"

Tweeter:

Eminence 33mm voicecoil, titanium diaphragm

Tweeter adjustment:

L-pad (off - 0dB)

Impedance:

8 Ohm

Flexible 400 Watt 2 x 10" Combo Bass Cabinet with 1" Tweeter for RH Heads
Product Features
  • Upright 400 Watt 2 x 10" combo bass cabinet with 1" tweeter offers you flexible heads and extreme portability for stage and studio use

  • Quickly customize by swapping in any RH bass head to suit your performance requirements

  • Pull-up handle and wheels for easy transportation

  • Extremely durable 18 mm plywood construction designed for life on the road

  • Vertically stackable with other RS-range cabinets for uncompromising full-frequency sound

  • Easily-detachable trolley lets you prevent wheel rattle fast when needed, with no extra tools to carry

  • Dual-concentric main driver fits a tweeter inside for a touch of sparkle

  • 2 x 10" custom Eminence* drivers for deep fundamental bass tone

  • 1" titanium diaphragm tweeter with 33 mm aluminum coil for increased percussive attack and definition

  • Dual speaker link connections on premium Neutrik speakON* connectors (8 Ohm impedance)

  • Compact and lightweight bass cabinet design

  • L-pad control lets you adjust to get the perfect amount of high-end detail

  • Designed and engineered in Denmark

RS210C
RS210C

The RS210C cabinet features the same 2 x 10" + 1" Eminence driver configuration found in the award-winning RS210 cabinet.

Additionally, its open amp design allows for you to choose between any of the three compact TC Electronic amp heads: RH750 RH450 or Staccato'51. The amp of your choice simply slides into the amp slot and is secured by a single screw in a matter of seconds.


    •    Fully customizable with any RH head
    •    Pull-up Handle and Wheels
    •    Roadworthy Construction
 

Your Voice, Your Choice
Your Voice, Your Choice

We were not interested in doing a combo that limits you, so we decided on an innovative solution where you can just swap heads as you see fit.

This means that you can get any voicing you like by choosing between our range of RH bass heads. Want more than one? Easy-peasy, you simply switch heads by loosening a single screw in a matter of seconds.

Maximum Portability
Maximum Portability

This is a combo you'd wanna take everywhere so we've made sure you can! It features a pull-up handle and wheels for easy transportation.

Also, you can detach the trolley in seconds if you want to, no need for any tools whatsoever. You can leave the trolley on during gigs, but sometimes you may experience a slight rattle - that's why we made it dead easy to take it off.

Built for The Road
Built for The Road

This combo is super roadworthy and features 18MM hardwearing plywood, super stackability and a breakout speaker connection to drive up to 2 additional TC cabinets.

When on the road, we bet you will enjoy the comfort of having a state-of-the-art head built in to your main cab, as well as the fact that you can wheel it around before and after gigs.

Vertical Stacking Explained
Vertical Stacking Explained

Vertical Stacking... It may sound like a term that was developed by our sales and marketing departments, but in reality Vertical Stacking was born in our bass development department. The concept emerged from years and years of bass playing. Yep, that's right! The guys developing TC bass gear are actually bass players themselves, and they know what it's like out there in the real world of bass.

The Problem
The Problem

If you ever play gigs at private parties or small to mid-sized venues, you probably decided to only bring one bass cab - typically one with a 4x10" speaker configuration.

If you place a 4 x10" cab on the floor the sound waves will bounce off the floor. While this is great for getting that fat low-end impact, the downside is that you can't hear the details of your playing. (Well, your knees can, but not your ears.)

One solution is to place the cab on a chair, a rack case or similar. Now, you can hear the mid and high frequencies much better, but the downside is lack of low-end presence. Since you elevated the cab, you lose the early reflections bouncing off the floor.

In other words, no matter what you do, using only one 4 x 10" cab means a compromise of sound quality.

The Solution
The Solution

The solution to the problem is our unique Vertical Stacking concept. There is nothing wrong with using 4 10" speakers. In most situations, that is more than enough - the problem is that all 4 speakers are fitted inside a square box in a 2x2 configuration.

Our answer is a 4x1 speaker configuration using either two 2x10", 2x10"/2x12" or two 2x12" cabs. Whether you want 10 or 12" speakers or a combination, the point is that you stack the speakers vertically.

The early reflections add punch and low-end to your sound, but at the same time, you can hear every detail thanks to the fact that the top speaker is aligned with your ears.

No More Compromises. Issue Solved!

Horizontal Alternative
Horizontal Alternative

As long as you use TC cabinets, most of our amps can actually handle 3 cabs simultaneously.

Obviously, it would become a very tall stack if you stacked 3 2x10" or 2x12" cabs vertically, in fact you may not be able to reach the amp...

But don't worry, due to the extra cab, it actually makes sense to stack them in the traditional, horizontal way if you hook up three cabs.

Classic Stacking
Classic Stacking

If weight and space is less of a concern, you can always go for the classic configuration of 8x10". Or how about 2x12" in the bottom, 4x10" in the middle and 2x10" on top? Obviously, such solutions will also give you all the benefits of vertical stacking using smaller cabs.

Acoustic Tilt
Acoustic Tilt

Just like early reflections are key to the Vertical Stacking concept, you can take advantage of the same phenomenon if you use either an RS212 or RS112 as the lower cabinet and an RS210 as the upper cabinet.

It's perfectly fine to align the front of each cabinet, but if you want to emphasize clarity and definition in a natural way (without adjusting the tone controls of the amp), try pushing the upper RS210 cab back a bit.

Now, you will get eary reflections of the upper cabinet coming your way, and even though it may sound like a minor adjustment, the difference is significant and you can control the amount of early reflections by how far you push back the RS210 cab.

 

Specification
Specs
Dimensions:

W x H x D 356 x 664 x 356mm

Weight:

21 kg / 46 lbs

Power handling:

400 Watt

Enclosure:

18mm plywood side panels, 18mm rounded carved hardwood corners

Surface treatment:

'Anti-skid' dual component surface

Porting:

Rear porting

Woofer:

Eminence custom 10"

Tweeter:

Eminence 33mm voicecoil, titanium diaphragm

Tweeter adjustment:

L-pad (off - 0dB)

Impedance:

8 Ohm

other products

SHIPPING

Domestic delivery only

PRODUCT WARRANTY

For electric and electronic product only.

MAINTENANCE

Only products purchased from importers and dealer that has a warranty on the product.