4-String Original PJ-Bass 8SU + 9J-L1
Big, deep vintage P-Bass tone with full, warm deep vintage J-Bass tone - The most popular hum-cancelling Precision bass upgrade pickups with the most popular dual inline-coil hum-cancelling Jazz bass upgrade pickups.
The original Bartolini design gives you the timeless tone that started it all – full and warm for that vintage voice you’ve been craving, enhancing the natural voice of your bass. These split coil pickups are hum-cancelling, so they are well suited for studio or stage. They have a blade core design, so you don’t have to worry about string alignment. Original Barts bring out your voice, low and clear.
This P-J set is designed for players who need P and J voices in one instrument. The P neck pickup has a higher output than the J bridge pickup in the same way as a P-Bass has higher output than a J-Bass.
In the early ‘70s, Bill Bartolini leveraged his deep knowledge of acoustics to create pickups that produce the most natural, musical voice from the instrument. He added shielding to block radio signals and noise. He developed a method of sealing, isolating, and stabilizing the coils so they could be encapsulated in epoxy to eliminate “microphonics” – the nasty noise you get when you touch typical pickups.
Details
8S + 9J Technical Details
Wiring Diagram PDF
8SU Neck
- DC Resistance: ~6.2KΩ
- Resonant Frequency: ~6.4KHz
- Sensing Width: 2.36" [60mm] Max 1.57" [40mm] Min
9J-L1 Bridge
- DC Resistance: ~6.2KΩ
- Resonant Frequency: ~6.4KHz
- Sensing Width: 2.36" [60mm] Max 1.57" [40mm] Min
Shape Details
P-Bass
- 2.2" [55.9mm] Long,
- 1.08" [27.4mm] Wide,
- 0.69" [17.5mm] Thick + 0.11" [2.8mm] Cable
- 2 Standard P Pickup Mounting ears on each part for your #3 or #4 screws
Standard Long J-Bass (-L and -LN)
- 3.6" [91.4mm] Long,
- 0.73" [18.5mm] Wide,
- 0.83" [21.1mm] Thick + 0.11" [2.8mm] Cable
- 4 Standard J Pickup Mounting ears for your #3 or #4 screws
Bass Series 4-String Fender Bass Precision / Jazz Original Series PJ-Bass 8SU + 9J-L1
4-String Original PJ-Bass 8SU + 9J-L1
Big, deep vintage P-Bass tone with full, warm deep vintage J-Bass tone - The most popular hum-cancelling Precision bass upgrade pickups with the most popular dual inline-coil hum-cancelling Jazz bass upgrade pickups.
The original Bartolini design gives you the timeless tone that started it all – full and warm for that vintage voice you’ve been craving, enhancing the natural voice of your bass. These split coil pickups are hum-cancelling, so they are well suited for studio or stage. They have a blade core design, so you don’t have to worry about string alignment. Original Barts bring out your voice, low and clear.
This P-J set is designed for players who need P and J voices in one instrument. The P neck pickup has a higher output than the J bridge pickup in the same way as a P-Bass has higher output than a J-Bass.
In the early ‘70s, Bill Bartolini leveraged his deep knowledge of acoustics to create pickups that produce the most natural, musical voice from the instrument. He added shielding to block radio signals and noise. He developed a method of sealing, isolating, and stabilizing the coils so they could be encapsulated in epoxy to eliminate “microphonics” – the nasty noise you get when you touch typical pickups.
Details
8S + 9J Technical Details
Wiring Diagram PDF
8SU Neck
- DC Resistance: ~6.2KΩ
- Resonant Frequency: ~6.4KHz
- Sensing Width: 2.36" [60mm] Max 1.57" [40mm] Min
9J-L1 Bridge
- DC Resistance: ~6.2KΩ
- Resonant Frequency: ~6.4KHz
- Sensing Width: 2.36" [60mm] Max 1.57" [40mm] Min
Shape Details
P-Bass
- 2.2" [55.9mm] Long,
- 1.08" [27.4mm] Wide,
- 0.69" [17.5mm] Thick + 0.11" [2.8mm] Cable
- 2 Standard P Pickup Mounting ears on each part for your #3 or #4 screws
Standard Long J-Bass (-L and -LN)
- 3.6" [91.4mm] Long,
- 0.73" [18.5mm] Wide,
- 0.83" [21.1mm] Thick + 0.11" [2.8mm] Cable
- 4 Standard J Pickup Mounting ears for your #3 or #4 screws
4-String Original PJ-Bass 8SU + 9J-L1
Big, deep vintage P-Bass tone with full, warm deep vintage J-Bass tone - The most popular hum-cancelling Precision bass upgrade pickups with the most popular dual inline-coil hum-cancelling Jazz bass upgrade pickups.
The original Bartolini design gives you the timeless tone that started it all – full and warm for that vintage voice you’ve been craving, enhancing the natural voice of your bass. These split coil pickups are hum-cancelling, so they are well suited for studio or stage. They have a blade core design, so you don’t have to worry about string alignment. Original Barts bring out your voice, low and clear.
This P-J set is designed for players who need P and J voices in one instrument. The P neck pickup has a higher output than the J bridge pickup in the same way as a P-Bass has higher output than a J-Bass.
In the early ‘70s, Bill Bartolini leveraged his deep knowledge of acoustics to create pickups that produce the most natural, musical voice from the instrument. He added shielding to block radio signals and noise. He developed a method of sealing, isolating, and stabilizing the coils so they could be encapsulated in epoxy to eliminate “microphonics” – the nasty noise you get when you touch typical pickups.
Details
8S + 9J Technical Details
Wiring Diagram PDF
8SU Neck
- DC Resistance: ~6.2KΩ
- Resonant Frequency: ~6.4KHz
- Sensing Width: 2.36" [60mm] Max 1.57" [40mm] Min
9J-L1 Bridge
- DC Resistance: ~6.2KΩ
- Resonant Frequency: ~6.4KHz
- Sensing Width: 2.36" [60mm] Max 1.57" [40mm] Min
Shape Details
P-Bass
- 2.2" [55.9mm] Long,
- 1.08" [27.4mm] Wide,
- 0.69" [17.5mm] Thick + 0.11" [2.8mm] Cable
- 2 Standard P Pickup Mounting ears on each part for your #3 or #4 screws
Standard Long J-Bass (-L and -LN)
- 3.6" [91.4mm] Long,
- 0.73" [18.5mm] Wide,
- 0.83" [21.1mm] Thick + 0.11" [2.8mm] Cable
- 4 Standard J Pickup Mounting ears for your #3 or #4 screws
other products
SHIPPING
Domestic delivery only
PRODUCT WARRANTY
For electric and electronic product only.
MAINTENANCE
Only products purchased from importers and dealer that has a warranty on the product.